1) With a razor or blade knife, cut the cardboard within the stapled area not exceeding 2 inches from the outer edge of the package.
NOTE:
The reason for cutting within 2 inches of the outer edges is that the plywood that frames the package is only 2 inches wide, further cutting may result in damaging the cutout itself.
2) Flip up or remove the cut cardboard to reveal the cutout.
3) Remove the masking tape as gently as possible to avoid damaging the cutout. Then remove the cutout and its components i.e. easel
4) Unfold cutout and Easel(s) and lay flat on clean, dry surface. Bottom portion of easel(s) is already attached.
5) Fold the Easel(s) lengthwise along the crease, creating a flap.
6) Remove paper back from adhesive or Velcro strip from flap.
7) Press flap firmly onto cutout.
8) Fold over half moon and crease small flap removing Small Square
9)Remove paper back from adhesive or Velcro strip on half moon piece.
